xTool S1 vs Creality Falcon2 Pro
A diode laser against a diode laser: manufacturer specs, current prices and what each can cut and engrave.
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices today
Specs side by side
| Spec | xTool S1 | Creality Falcon2 Pro |
|---|---|---|
| Laser | 40 / 20 / 10W diode; 2W infrared (1,064 nm), optional add-on | 60 / 40 / 22W diode (455 nm) |
| Work area | 498 × 319 mm (19.6 × 12.6 in) | 400 × 400 mm (15.7 × 15.7 in) |
| Max speed | 600 mm/s | Not published |
| Enclosure | Enclosed | Enclosed |
| Laser class | Class 1 | Class 1 |
| Motion system | Not published | Not published |
| Camera | No | Yes |
| Autofocus | Yes | Not published |
| Air assist included | Not published | Yes |
| Rotary support | Yes | Yes |
| Passthrough | Yes | Not published |
| LightBurn support | Yes | Yes |
| Footprint (W × D × H) | 765 × 561 × 183 mm (30.1 × 22.1 × 7.2 in) | 664 × 570 × 328.4 mm (26.1 × 22.4 × 12.9 in) |
| Weight | 20 kg (44.1 lb) | 19.51 kg (43.0 lb) |
Where they differ on materials
| Material | xTool S1: cut / engrave | Creality Falcon2 Pro: cut / engrave |
|---|---|---|
| Stainless steel | No / Yes | No / Limited |
Full matrices are on each machine's page.