Laser engraving supplies

Stock and consumables for each material we cover, picked for what actually matters with a laser: cast rather than extruded acrylic, vegetable-tanned leather, PU rather than PVC leatherette.

Each pick says why it's here and what to check. The material guides show which laser types can cut or engrave each one.

We earn a commission if you buy through store links on this page, at no extra cost to you. How this works

Basswood plywood

VKIZA

VKIZA 3 mm basswood plywood, 12 × 12 in (30 sheets)

$37.99 at Amazon, checked 3 hours ago

A bulk pack of 1/8 in (3 mm) basswood ply in 12 × 12 in squares, a size that fits most enclosed diode and desktop CO2 beds without trimming. Basswood’s pale, even face shows engraving contrast well.

The listing doesn’t say which glue it uses, so make a test cut first. If a sheet chars along the glue line or won’t cut through where others do, the glue is the cause, not your settings.

View at Amazon

Woodpeckers

Woodpeckers 3 mm Baltic birch plywood, 12 × 12 in (8 sheets)

$23.08 at Amazon, checked 3 hours ago

Baltic birch is stiffer than basswood ply, with a harder face, so it suits boxes, puzzles and parts that get handled.

Woodpeckers grades it B/BB: the face is one piece of veneer and the back may have a couple of small color-matched patches, so engrave the face. The box of 8 is a small way to dial in settings before buying a bigger box.

View at Amazon

MDF

Craft Closet

Craft Closet 3 mm MDF, 12 × 19 in (10 boards)

$49.99 at Amazon, checked 3 hours ago

Sold as Glowforge-ready, in a 12 × 19 in size cut for that class of bed. MDF is the cheapest flat stock for jigs, templates and painted signs, and its uniform core engraves evenly with no grain.

Its binder makes harsher smoke than wood. Use it with a vented or filtered setup, not an open machine in a living space.

View at Amazon

Solid wood

GOH DODD

GOH DODD 4 in solid pine coasters (36 pack)

$29.99 at Amazon, checked 3 hours ago

One-piece pine rounds rather than glued-up strips, so no seam runs through your design. They come pre-sanded with non-slip pads, ready to engrave and sell as sets.

Pine is soft and resinous: it engraves quickly but darkens unevenly where the grain changes, and resin can flare, so keep air assist on.

View at Amazon

The Hardwood Edge

The Hardwood Edge walnut planks, 1/4 × 6.5 × 15 in (4 boards)

$36.37 at Amazon, checked 3 hours ago

Solid walnut, not walnut veneer on plywood, which is what most “walnut sheet” listings are. A dark, dense hardwood like walnut engraves with strong contrast.

The listing warns that color ranges from pale brown to dark chocolate, so sort boards before making a matched set. Cutting through 6 mm hardwood is beyond many diode lasers; check your machine’s cut depth on its page here.

View at Amazon

Clear acrylic

KAITELA

KAITELA 3 mm clear cast acrylic, 12 × 16 in (2 sheets)

$18.99 at Amazon, checked 3 hours ago

Clear cast acrylic for edge-lit signs and displays: engraving frosts the surface, so it glows when lit from the edge.

You need a CO2 laser to cut it. A blue diode’s light passes straight through clear acrylic, and masking tape on top doesn’t change that.

View at Amazon

Colored cast acrylic

Deylixay

Deylixay 3 mm black cast acrylic, 12 × 12 in (5 sheets)

$19.99 at Amazon, checked 3 hours ago

Black is the workhorse color for signs and keychains: engraved cast acrylic turns frosty white, the highest contrast you’ll get. Five full sheets of one color go further than a sampler once you know what you’re making.

View at Amazon

Deylixay

Deylixay 3 mm colored cast acrylic, 12 × 12 in (12 colors)

$38.99 at Amazon, checked 3 hours ago

One sheet each of 12 colors, so you can try several before buying one in bulk. They’re cast, not extruded, which matters: cast acrylic engraves frosty white, while extruded engraves clear.

Peel the protective film off both sides first. The pack includes a clear sheet, which only a CO2 laser can cut.

View at Amazon

Anodized aluminum

weparmeety

weparmeety anodized aluminum cards (100 pack, 10 colors)

$9.79 at Amazon, checked 3 hours ago

Anodized aluminum is the metal every laser type can mark: the laser removes the colored layer and leaves bright aluminum underneath, with no spray. Ten colors in a pack, but at 0.21 mm they flex, so they suit tags and giveaways more than keepsakes.

View at Amazon

Powder-coated and painted metal

YOUKE OLA

YOUKE OLA 20 oz powder-coated skinny tumblers (16 pack)

$59.99 at Amazon, checked 3 hours ago

Black powder-coated double-wall tumblers sold for laser engraving, with lids and straws. Engraving burns off the coating to show the stainless underneath.

Going all the way around a tumbler needs a rotary; each laser’s page lists the rotaries that fit it. Burning powder coat gives off fumes, so vent it.

View at Amazon

Stainless steel

Yunsailing

Yunsailing 304 stainless steel cards, 0.5 mm (12 pack)

$12.99 at Amazon, checked 3 hours ago

Credit-card-size blanks in 304 stainless, the common grade for tumblers and tags, at a stiff 0.5 mm. A fiber laser marks them directly, and a MOPA can add color. On a CO2 or diode, use marking spray. They come pre-cut, so no metal cutting is needed.

View at Amazon

Slate

VIBRATITE

VIBRATITE 4 in square slate coasters (60 pack)

$41.99 at Amazon, checked 3 hours ago

Natural slate engraves light grey with no finishing, which makes coasters one of the simplest products to make. The rough, irregular edges are the style, not damage, and the backs already have bumpers, so there’s nothing to glue on.

Slate varies from piece to piece; engrave one and adjust before running a batch.

View at Amazon

Genuine leather

JinRuiKJ

JinRuiKJ 2 mm veg-tan leather, 8 × 12 in

$11.99 at Amazon, checked 3 hours ago

Vegetable-tanned, which is what you want in a laser: chrome-tanned leather can release chromium compounds when burned. At about 2 mm it’s a good weight for patches, keychains and card wallets, and the undyed surface engraves dark brown.

Expect a strong smell, and vent it.

View at Amazon

Springfield Leather Company

Springfield Leather 8–9 oz veg-tan leather, 12 × 12 in

$18.95$22.95 at Amazon, checked 3 hours ago

Thick (3.2–3.6 mm) full-grain veg-tan for coasters, belts and pieces that need to hold their shape. Thick leather engraves well but takes much more power to cut through, so for cut-out patches a 2 mm sheet is the easier start.

View at Amazon

Leatherette (PU)

iFForce

iFForce PU leatherette sheets, 12.6 × 10.6 in (6 colors)

$14.99$16.99 at Amazon, checked 3 hours ago

Listed as PU leather, the only kind of faux leather to put in a laser: many are PVC, which gives off chlorine gas. If a leatherette listing doesn’t say PU, don’t laser it.

These have an iron-on adhesive back for hat patches, and one sheet makes dozens of small patches.

View at Amazon

Paper and cardboard

Cricut

Cricut Value cardstock, black, 12 × 12 in (50 sheets)

$9.09$12.99 at Amazon, checked 3 hours ago

65 lb (176 gsm) cardstock with a solid-color core, so cut edges stay black instead of showing a white center. Sold by Amazon itself.

Paper catches fire easily: use low power, air assist and a honeycomb bed, and watch every job.

View at Amazon

Cork

Faithful Panda

Faithful Panda 3.5 in uncoated cork coasters (100 pack)

$25.50 at Amazon, checked 3 hours ago

Natural cork with no sealant or dye layer to burn through, die-cut with straight edges. Cork engraves dark brown at low power on a diode or CO2 laser. It chars and can smolder, so stay with the machine through a batch.

View at Amazon

Masking and marking

TapeManBlue

TapeManBlue 12 in paper transfer tape (100 ft)

$23.99 at Amazon, checked 3 hours ago

Paper transfer tape works as laser masking: cover the wood, cut or engrave through it, and smoke stains land on the tape instead of the surface. It’s sold for vinyl, but a medium-tack paper tape like this is a common laser choice.

Stick to paper, not clear plastic tape, whose film you can’t be sure of.

For Solid wood, Basswood plywood and MDF.

View at Amazon

xTool

xTool black laser marking spray, 8.5 oz

$32.99 at Amazon, checked 3 hours ago

Lets a CO2 or diode laser leave a permanent black mark on bare stainless steel: spray, let it dry, engrave, then wash off the rest. xTool says its own P2 CO2 needs a coating like this for stainless.

xTool lists it for CO2 lasers from 25 W and fiber and diode lasers from 10 W. Sold by xTool’s official Amazon store.

For Stainless steel.

View at Amazon

Prices are as of the time shown and can change; the store's checkout is the final word.