xTool F1 Ultra vs ComMarker B4
A hybrid laser against a fiber laser: manufacturer specs, current prices and what each can cut and engrave.
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices today
Specs side by side
| Spec | xTool F1 Ultra | ComMarker B4 |
|---|---|---|
| Laser | 20W fiber; 20W diode | 100 / 50 / 30 / 20W fiber |
| Work area | 220 × 220 mm (8.7 × 8.7 in) | Not published |
| Max speed | 10,000 mm/s | Not published |
| Enclosure | Enclosed | Not published |
| Laser class | Class 4 | Not published |
| Motion system | Galvo | Galvo |
| Camera | Yes | Not published |
| Autofocus | Yes | Not published |
| Air assist included | Not published | Not published |
| Rotary support | Yes | Yes |
| Passthrough | Not published | Not published |
| LightBurn support | Not published | Yes |
| Footprint (W × D × H) | 273 × 373 × 492 mm (10.7 × 14.7 × 19.4 in) | 270 × 380 × 560 mm (10.6 × 15.0 × 22.0 in) |
| Weight | 14.7 kg (32.4 lb) | 11 kg (24.3 lb) |
Where they differ on materials
| Material | xTool F1 Ultra: cut / engrave | ComMarker B4: cut / engrave |
|---|---|---|
| Basswood plywood | Yes / Yes | No / No |
| Colored cast acrylic | Limited / Limited | No / Limited |
| Cork | Yes / Yes | No / No |
| Fabric and felt | Yes / Yes | No / No |
| Genuine leather | Yes / Yes | No / No |
| Leatherette (PU) | Yes / Yes | No / No |
| MDF | Yes / Yes | No / No |
| Paper and cardboard | Yes / Yes | No / No |
| Slate | No / Yes | No / Limited |
| Solid wood | Yes / Yes | No / No |
Full matrices are on each machine's page.