xTool P2S
CO2 · up to 55W · enclosed
From $2,999 at xTool
xTool F1 Ultra
Hybrid Up to 20W · 220 × 220 mm (8.7 × 8.7 in) work area · enclosed
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| xTool | $2,999 | In stock | 1 hour ago | View at xTool |
| The Maker's Chest | $3,999$4,799 | Out of stock | 1 hour ago | View at The Maker's Chest |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 20W fiber; 20W diodesource |
|---|---|
| Work area | 220 × 220 mm (8.7 × 8.7 in)source |
| Max speed | 10,000 mm/ssource |
| Enclosure | Enclosedsource |
| Laser class | Class 4source |
| Motion system | Galvosource |
| Camera | Yessource |
| Autofocus | Yessource |
| Air assist included | Not published |
| Rotary support | Yessource |
| Passthrough | Not published |
| LightBurn support | Not published |
| Footprint (W × D × H) | 273 × 373 × 492 mm (10.7 × 14.7 × 19.4 in)source |
| Weight | 14.7 kg (32.4 lb)source |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Typical for this laser type |
| Basswood plywood | Yes | Yes | Listed by the manufacturer |
| Clear acrylic | No | No | Typical for this laser type |
| Colored cast acrylic | Limited | Limited | Typical for this laser type Marks some plastics; test first. |
| Cork | Yes | Yes | Typical for this laser type |
| Fabric and felt | Yes | Yes | Listed by the manufacturer |
| Genuine leather | Yes | Yes | Listed by the manufacturer |
| Glass | No | Limited | Typical for this laser type Test first. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Listed by the manufacturer |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Listed by the manufacturer |
| Powder-coated and painted metal | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Slate | No | Yes | Typical for this laser type Test first. |
| Solid wood | Yes | Yes | Listed by the manufacturer |
| Stainless steel | Limited | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Cuts thin sheet only. |
Compare
Alternatives at a similar price
LaserPecker LP4
Hybrid · up to 10W · enclosed
From $1,299 at The Maker's Chest
xTool F1
Hybrid · up to 10W · enclosed
From $1,499 at The Maker's Chest