Creality Falcon2 Pro
Diode · up to 60W · enclosed
From $899 at Creality Falcon
Glowforge Aura
Diode Up to 6W · 305 × 305 mm (12.0 × 12.0 in) work area · enclosed
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| Glowforge | $999$1,199 | In stock | 1 hour ago | View at Glowforge |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 6W diode (450 nm)source |
|---|---|
| Work area | 305 × 305 mm (12.0 × 12.0 in)source |
| Max speed | Not published |
| Enclosure | Enclosedsource |
| Laser class | Class 1source |
| Motion system | Gantrysource |
| Camera | Yessource |
| Autofocus | Yessource |
| Air assist included | Yessource |
| Rotary support | Not published |
| Passthrough | Yessource |
| LightBurn support | Not published |
| Footprint (W × D × H) | 559 × 521 × 127 mm (22.0 × 20.5 × 5.0 in)source |
| Weight | 8.6 kg (19.0 lb)source |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Typical for this laser type |
| Basswood plywood | Yes | Yes | Listed by the manufacturer |
| Clear acrylic | No | No | Typical for this laser type A 455 nm blue beam passes straight through clear acrylic. |
| Colored cast acrylic | Yes | Yes | Listed by the manufacturer |
| Cork | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Fabric and felt | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Genuine leather | Yes | Yes | Listed by the manufacturer |
| Glass | No | Limited | Typical for this laser type Dark, painted or coated glass only. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Typical for this laser type |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Listed by the manufacturer |
| Powder-coated and painted metal | No | Yes | Typical for this laser type Removes the coating to show metal underneath. |
| Slate | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Solid wood | Yes | Yes | Listed by the manufacturer |
| Stainless steel | No | Limited | Typical for this laser type Higher-power diodes darken it; lower-power ones need marking spray. |
Compare
Alternatives at a similar price
Atomstack A20 Pro V2
Diode · up to 20W · open frame
From $369 at Atomstack
Creality Falcon A1
Diode · up to 10W · enclosed
From $549 at Creality Falcon