xTool P3
CO2 · up to 80W · enclosed
From $6,999 at xTool
Glowforge Pro HD
CO2 Up to 45W · 495 × 279 mm (19.5 × 11.0 in) work area · enclosed
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| Glowforge | $7,999 | In stock | 1 hour ago | View at Glowforge |
| The Maker's Chest | $6,999 | Out of stock | 1 hour ago | View at The Maker's Chest |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 45W CO2 (10,600 nm)source |
|---|---|
| Work area | 495 × 279 mm (19.5 × 11.0 in)source |
| Max speed | Not published |
| Enclosure | Enclosedsource |
| Laser class | Class 4source |
| Motion system | Gantrysource |
| Camera | Yessource |
| Autofocus | Yessource |
| Air assist included | Yessource |
| Rotary support | Not published |
| Passthrough | Yessource |
| LightBurn support | Not published |
| Footprint (W × D × H) | 965 × 527 × 210 mm (38.0 × 20.7 × 8.3 in)source |
| Weight | Not published |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Basswood plywood | Yes | Yes | Listed by the manufacturer |
| Clear acrylic | Yes | Yes | Typical for this laser type |
| Colored cast acrylic | Yes | Yes | Listed by the manufacturer |
| Cork | Yes | Yes | Listed by the manufacturer |
| Fabric and felt | Yes | Yes | Listed by the manufacturer |
| Genuine leather | Yes | Yes | Listed by the manufacturer |
| Glass | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Surface frosting; let pieces cool slowly. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Typical for this laser type |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Listed by the manufacturer |
| Powder-coated and painted metal | No | Yes | Typical for this laser type Removes the coating to show metal underneath. |
| Slate | No | Yes | Typical for this laser type |
| Solid wood | Yes | Yes | Listed by the manufacturer |
| Stainless steel | No | Limited | Typical for this laser type Needs a marking spray or coating. |
Compare
Alternatives at a similar price
Monport ONYX
CO2 · up to 55W
Price not tracked yet
OMTech Polar Lite
CO2 · up to 55W
From $2,199.99 at OMTech