xTool F2 vs LaserPecker LP4
A hybrid laser against a hybrid laser: manufacturer specs, current prices and what each can cut and engrave.
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices today
Specs side by side
| Spec | xTool F2 | LaserPecker LP4 |
|---|---|---|
| Laser | 15W diode; 5W infrared (1,064 nm) | 10W diode (450 nm); 2W infrared (1,064 nm) |
| Work area | 115 × 115 mm (4.5 × 4.5 in) | 160 × 120 mm (6.3 × 4.7 in) |
| Max speed | 6,000 mm/s | 4,000 mm/s |
| Enclosure | Enclosed | Enclosed |
| Laser class | Class 4 | Not published |
| Motion system | Not published | Not published |
| Camera | Yes | Not published |
| Autofocus | Yes | Not published |
| Air assist included | Not published | Not published |
| Rotary support | Yes | Yes |
| Passthrough | Not published | Not published |
| LightBurn support | No | Yes |
| Footprint (W × D × H) | 175 × 237 × 334 mm (6.9 × 9.3 × 13.1 in) | 260.5 × 218 × 283.5 mm (10.3 × 8.6 × 11.2 in) |
| Weight | 4.6 kg (10.1 lb) | 4 kg (8.8 lb) |
Where they differ on materials
| Material | xTool F2: cut / engrave | LaserPecker LP4: cut / engrave |
|---|---|---|
| Colored cast acrylic | Limited / Limited | Limited / Yes |
Full matrices are on each machine's page.