LaserPecker Rotary Extension for LP4/LP5/LX1
rotary
View at the storeLaserPecker LP4
Hybrid Up to 10W · 160 × 120 mm (6.3 × 4.7 in) work area · enclosed
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| The Maker's Chest · Standard Bundle | $1,299$1,999 | In stock | 1 hour ago | View at The Maker's Chest |
| LaserPecker | $1,599$1,999 | Out of stock | 1 hour ago | View at LaserPecker |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 10W diode (450 nm); 2W infrared (1,064 nm)source |
|---|---|
| Work area | 160 × 120 mm (6.3 × 4.7 in)source |
| Max speed | 4,000 mm/ssource |
| Enclosure | Enclosedsource |
| Laser class | Not published |
| Motion system | Not published |
| Camera | Not published |
| Autofocus | Not published |
| Air assist included | Not published |
| Rotary support | Yessource |
| Passthrough | Not published |
| LightBurn support | Yessource |
| Footprint (W × D × H) | 260.5 × 218 × 283.5 mm (10.3 × 8.6 × 11.2 in)source |
| Weight | 4 kg (8.8 lb)source |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Basswood plywood | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Clear acrylic | No | No | Typical for this laser type A 455 nm blue beam passes straight through clear acrylic. |
| Colored cast acrylic | Limited | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Dark or opaque colors only. Clear, white and some blue acrylics let a blue diode beam pass through. |
| Cork | Yes | Yes | Typical for this laser type |
| Fabric and felt | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Genuine leather | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Glass | No | Limited | Typical for this laser type Dark, painted or coated glass only. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Typical for this laser type |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. |
| Powder-coated and painted metal | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Removes the coating to show metal underneath. |
| Slate | No | Yes | Typical for this laser type |
| Solid wood | Yes | Yes | Listed by the manufacturer |
| Stainless steel | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Higher-power diodes darken it; lower-power ones need marking spray. |
Accessories that fit
LaserPecker Slide Extension for LP4/LP5
work area
View at the storeCompare
Alternatives at a similar price
xTool F2
Hybrid · up to 15W · enclosed
From $1,299 at xTool
ComMarker B4
Fiber · up to 100W
From $1,399 at ComMarker
xTool F1
Hybrid · up to 10W · enclosed
From $1,499 at The Maker's Chest