xTool Slide Extension for F2/F1/F1 Lite
work area
View at the storexTool F2
Hybrid Up to 15W · 115 × 115 mm (4.5 × 4.5 in) work area · enclosed
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| xTool | $1,299$1,499 | In stock | 1 hour ago | View at xTool |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 15W diode; 5W infrared (1,064 nm)source |
|---|---|
| Work area | 115 × 115 mm (4.5 × 4.5 in)source |
| Max speed | 6,000 mm/ssource |
| Enclosure | Enclosedsource |
| Laser class | Class 4source |
| Motion system | Not published |
| Camera | Yessource |
| Autofocus | Yessource |
| Air assist included | Not published |
| Rotary support | Yessource |
| Passthrough | Not published |
| LightBurn support | Nosource |
| Footprint (W × D × H) | 175 × 237 × 334 mm (6.9 × 9.3 × 13.1 in)source |
| Weight | 4.6 kg (10.1 lb)source |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Typical for this laser type |
| Basswood plywood | Yes | Yes | Listed by the manufacturer |
| Clear acrylic | No | No | Typical for this laser type A 455 nm blue beam passes straight through clear acrylic. |
| Colored cast acrylic | Limited | Limited | Typical for this laser type Dark or opaque colors only. Clear, white and some blue acrylics let a blue diode beam pass through. |
| Cork | Yes | Yes | Typical for this laser type |
| Fabric and felt | Yes | Yes | Listed by the manufacturer |
| Genuine leather | Yes | Yes | Listed by the manufacturer |
| Glass | No | Limited | Typical for this laser type Dark, painted or coated glass only. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Listed by the manufacturer |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Listed by the manufacturer |
| Powder-coated and painted metal | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Removes the coating to show metal underneath. |
| Slate | No | Yes | Typical for this laser type |
| Solid wood | Yes | Yes | Listed by the manufacturer |
| Stainless steel | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Higher-power diodes darken it; lower-power ones need marking spray. |
Accessories that fit
Compare
Alternatives at a similar price
LaserPecker LP4
Hybrid · up to 10W · enclosed
From $1,299 at The Maker's Chest
ComMarker B4
Fiber · up to 100W
From $1,399 at ComMarker
xTool F1
Hybrid · up to 10W · enclosed
From $1,499 at The Maker's Chest