Ortur Extension Kit for Laser Master 3 (ETK2.0)
work area
View at the storeOrtur Laser Master 3
Diode Up to 40W · 400 × 380 mm (15.7 × 15.0 in) work area · open frame
We earn a commission if you buy through store links on this page, at no extra cost to you. How this works
Prices
| Store | Price | Stock | Checked | Buy |
|---|---|---|---|---|
| Ortur · 10W | $299.99$699.99 | In stock | 1 hour ago | View at Ortur |
| Ortur · 20W | $639.99$999.99 | In stock | 1 hour ago | View at Ortur |
| Ortur · 40W | $1,029.99$1,379.99 | In stock | 1 hour ago | View at Ortur |
Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.
90-day price history
Not enough history to chart yet. The chart fills in as we record prices every 6 hours.
Specifications
| Laser | 40 / 20 / 10W diodesource |
|---|---|
| Work area | 400 × 380 mm (15.7 × 15.0 in)source |
| Max speed | 333.3 mm/ssource |
| Enclosure | Open framesource |
| Laser class | Not published |
| Motion system | Not published |
| Camera | Not published |
| Autofocus | Nosource |
| Air assist included | Yessource |
| Rotary support | Yessource |
| Passthrough | Not published |
| LightBurn support | Yessource |
| Footprint (W × D × H) | 658 × 625 × 150 mm (25.9 × 24.6 × 5.9 in)source |
| Weight | Not published |
Checked against the manufacturer's pages on 2026-10-07.
What it can cut and engrave
| Material | Cut | Engrave | Basis |
|---|---|---|---|
| Anodized aluminum | No | Yes | Typical for this laser type |
| Basswood plywood | Yes | Yes | Typical for this laser type |
| Clear acrylic | No | No | Typical for this laser type A 455 nm blue beam passes straight through clear acrylic. |
| Colored cast acrylic | Limited | Limited | Typical for this laser type Dark or opaque colors only. Clear, white and some blue acrylics let a blue diode beam pass through. |
| Cork | Yes | Yes | Typical for this laser type |
| Fabric and felt | Yes | Yes | Typical for this laser type |
| Genuine leather | Yes | Yes | Typical for this laser type |
| Glass | No | Limited | Typical for this laser type Dark, painted or coated glass only. |
| Leatherette (PU) | Yes | Yes | Typical for this laser type Polyurethane (PU) leatherette only. |
| MDF | Yes | Yes | Typical for this laser type |
| PVC and vinyl | No | No | Never laser this material |
| Paper and cardboard | Yes | Yes | Typical for this laser type |
| Powder-coated and painted metal | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Removes the coating to show metal underneath. |
| Slate | No | Yes | Typical for this laser type |
| Solid wood | Yes | Yes | Typical for this laser type |
| Stainless steel | No | Yes | Cut: typical for this laser type. Engrave: listed by the manufacturer. Higher-power diodes darken it; lower-power ones need marking spray. |
Accessories that fit
Compare
Alternatives at a similar price
Sculpfun iCube Ultra
Diode · up to 12W · enclosed
From $299 at Sculpfun
Atomstack A20 Pro V2
Diode · up to 20W · open frame
From $369 at Atomstack
Creality Falcon A1
Diode · up to 10W · enclosed
From $549 at Creality Falcon