Burned Grain

Sculpfun iCube Ultra

Diode Up to 12W · 150 × 150 mm (5.9 × 5.9 in) work area · enclosed

We earn a commission if you buy through store links on this page, at no extra cost to you. How this works

Prices

StorePriceStockChecked
Sculpfun · Single laser$299$599In stock1 hour agoView at Sculpfun
Sculpfun · Dual laser$499$799In stock1 hour agoView at Sculpfun

Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.

90-day price history

Not enough history to chart yet. The chart fills in as we record prices every 6 hours.

Specifications

Sculpfun iCube Ultra specifications from the manufacturer
Laser12W diode (455 nm); 1.2W infrared (1,064 nm), optional add-onsource
Work area150 × 150 mm (5.9 × 5.9 in)source
Max speed166.7 mm/ssource
EnclosureEnclosedsource
Laser classClass 1source
Motion systemNot published
CameraNot published
AutofocusYessource
Air assist includedNot published
Rotary supportYessource
PassthroughNot published
LightBurn supportYessource
Footprint (W × D × H)335 × 357 × 289 mm (13.2 × 14.1 × 11.4 in)source
Weight5.95 kg (13.1 lb)source

Checked against the manufacturer's pages on 2026-10-07.

What it can cut and engrave

MaterialCutEngraveBasis
Anodized aluminumNoYesTypical for this laser type
Basswood plywoodYesYesListed by the manufacturer
Clear acrylicNoNoTypical for this laser type
A 455 nm blue beam passes straight through clear acrylic.
Colored cast acrylicLimitedLimitedTypical for this laser type
Dark or opaque colors only. Clear, white and some blue acrylics let a blue diode beam pass through.
CorkYesYesCut: typical for this laser type. Engrave: listed by the manufacturer.
Fabric and feltYesYesListed by the manufacturer
Genuine leatherYesYesListed by the manufacturer
GlassNoLimitedTypical for this laser type
Dark, painted or coated glass only.
Leatherette (PU)YesYesTypical for this laser type
Polyurethane (PU) leatherette only.
MDFYesYesListed by the manufacturer
PVC and vinylNoNoNever laser this material
Paper and cardboardYesYesListed by the manufacturer
Powder-coated and painted metalNoYesCut: typical for this laser type. Engrave: listed by the manufacturer.
Removes the coating to show metal underneath.
SlateNoYesTypical for this laser type
Solid woodYesYesListed by the manufacturer
Stainless steelNoYesCut: typical for this laser type. Engrave: listed by the manufacturer.
Higher-power diodes darken it; lower-power ones need marking spray.

Accessories that fit

Alternatives at a similar price