Burned Grain

xTool M2

Diode Up to 20W · 426 × 320 mm (16.8 × 12.6 in) work area · enclosed

Replaces the xTool M1 and xTool M1 Ultra.

We earn a commission if you buy through store links on this page, at no extra cost to you. How this works

Prices

StorePriceStockChecked
xTool · 10W$499$599In stock2 hours agoView at xTool
xTool · 20W$899$999In stock2 hours agoView at xTool

Prices are checked every 6 hours and can change at checkout. A price marked “verified by hand” was entered by us from the store and expires after 48 hours.

90-day price history

Not enough history to chart yet. The chart fills in as we record prices every 6 hours.

Specifications

xTool M2 specifications from the manufacturer
Laser20 / 10W diode (455 nm); 3W infrared (1,064 nm), optional add-onsource
Work area426 × 320 mm (16.8 × 12.6 in)source
Max speed600 mm/ssource
EnclosureEnclosedsource
Laser classClass 1source
Motion systemNot published
CameraYessource
AutofocusYessource
Air assist includedYessource
Rotary supportYessource
PassthroughNot published
LightBurn supportNot published
Footprint (W × D × H)610 × 569 × 180 mm (24.0 × 22.4 × 7.1 in)source
Weight12.3 kg (27.1 lb)source

Checked against the manufacturer's pages on 2026-10-07.

What it can cut and engrave

MaterialCutEngraveBasis
Anodized aluminumNoYesTypical for this laser type
Basswood plywoodYesYesListed by the manufacturer
Clear acrylicNoNoTypical for this laser type
A 455 nm blue beam passes straight through clear acrylic.
Colored cast acrylicYesYesListed by the manufacturer
CorkYesYesTypical for this laser type
Fabric and feltYesYesCut: listed by the manufacturer. Engrave: typical for this laser type.
Genuine leatherYesYesListed by the manufacturer
GlassNoLimitedTypical for this laser type
Dark, painted or coated glass only.
Leatherette (PU)YesYesTypical for this laser type
Polyurethane (PU) leatherette only.
MDFYesYesCut: listed by the manufacturer. Engrave: typical for this laser type.
PVC and vinylNoNoNever laser this material
Paper and cardboardYesYesCut: listed by the manufacturer. Engrave: typical for this laser type.
Powder-coated and painted metalNoYesTypical for this laser type
Removes the coating to show metal underneath.
SlateNoYesTypical for this laser type
Solid woodYesYesListed by the manufacturer
Stainless steelNoYesCut: typical for this laser type. Engrave: listed by the manufacturer.
Higher-power diodes darken it; lower-power ones need marking spray.

Accessories that fit

Compare

Alternatives at a similar price